Map the spectral response across a sample surface with high definition

Spectral Surface Mapping

 

Contact CRAIC Today! 
 

 

 

Perfect Vision for Science™

 

 

 

Contact CRAIC Today!
 

Lambdafire™, CRAIC Lambdafire™, Spectral Surface Mapping™, S2M™, the lit microscope base and the lit octagonal optical head are trademarks of CRAIC Technologies, Inc. CRAIC Technologies, 20/20™, 20/20 PV™ and "Perfect Vision for Science" are all trademarks of CRAIC Technologies, Inc. Instrument features offered depend upon instrument configuration.  Features listed here may not be present in some configurations.

*Features and specifications depend upon instrument configuration.  Specifications subject to change without notice.

UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.

Microspectrophotometer Reflectance Standards

CRAIC Technologies Microspectrometer Standards
Traceable UV-visible-NIR reflectance standards designed for microspectrophotometers
 

CRAIC Technologies™ Reflectance Microspectrometer Standards are calibrated using Standard Reference Materials from NIST and other internationally recognized standards bodies.  CRAIC Reflectance Standards are specifically designed for use with your UV-visible-NIR microspectrometer. All of our standards were developed to meet ASTM, ISO, ENFSI and SWGMAT criteria. Standards are available for wavelength and photometric calibration.

CRAIC calibrated Microspectrometer Standards are used with CRAIC microspectrophotometer systems as part of the automatic verification and validation process. These standards are simple to use as well as being traceable to internationally recognized Standard Reference Materials.

 
 
 
Contact CRAIC Today!

 

CRAIC Technologies™ Microspectrometer Standards
 

Specify make and model for when calling for pricing.

*Features and specifications depend upon instrument configuration.  Specifications subject to change without notice.

Microspectrophotometer Transmission Standards

CRAIC Technologies Microspectrometer Standards
 

 

CRAIC Technologies™ Transmission Microspectrometer Standards are calibrated using Standard Reference Materials from NIST and other internationally recognized standards bodies.  CRAIC Transmission Standards are specifically designed for use with your UV-visible-NIR microspectrometer. All of our standards were developed to meet ASTM, ISO, ENFSI and SWGMAT criteria. Standards are available for wavelength and photometric calibration.

CRAIC calibrated Microspectrometer Standards are used with CRAIC microspectrophotometer systems as part of the automatic verification and validation process. These standards are simple to use as well as being traceable to internationally recognized Standard Reference Materials.

 
Contact CRAIC Today!

 

CRAIC Technologies™ Microspectrometer Standards
 

Specify make and model for when calling for pricing.

*Features and specifications depend upon instrument configuration.  Specifications subject to change without notice.

Quartz Well slides from CRAIC Technologies™

CRAIC Technologies quartz wellslides

 

quartz slides quartz coverslips

 


CRAIC Technologies quartz well slides for microspectrophotometer and microspectrometer
 

 

 

 

 

 

 

CRAIC Technologies quartz wellslides are spectral grade and manufactured to the highest levels of quality.

Quartz wellslides are commonly used in UV-visible microspectroscopy and microscopy.  This is because common glass slides and coverslips absorb UV light resulting in very little transmission below 340 nm.  Quartz, on the other hand, transmits UV light with much greater efficiencies.

However, all quartz is not equal.  As with anything, there are various grades and specifications.  The most common quartz slides and coverslips use lower grade materials as they are not designed for deep UV microspectroscopy or microscopy.  However, a spectroscopist needs all the UV light they can get... especially in the deep ultraviolet region where many materials exhibit some very unique features.

To the left is the transmittance spectra of CRAIC spectral grade quartz and quartz commonly used in microscope slides and coverslips.  The purple line represents the type of quartz that is most commonly used to manufacture quartz slides and quartz coverslips.  As is obvious, there is a dramatic drop in UV transmission of this material below 265 nm.  This is one of the reasons so many scientists have difficulty with UV microspectroscopy between 200 to 265 nm when not using CRAIC quartz wellslides. The red line represents the optical grade quartz used by CRAIC Technologies in their quartz wellslides.  The amount of UV transmitted is over 85% down to 200 nm.

*Features and specifications depend upon instrument configuration.  Specifications subject to change without notice.

 

Microspectrophotometer, Raman microspectrometer, and UV-visible-NIR microscope consumables

CRAIC Technologies™ Consumables
 

 

CRAIC Technologies provides approved consumables including lamps, slides and other supplies for our microspectrophotometer, UV-visible-NIR microscope and Raman microspectrometer products. They are fully certified by CRAIC Technologies to be of the highest quality and are designed for use with our cutting edge products.

 

Contact CRAIC Today!

 

Please specify make and model of your instrument when calling for pricing.

UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.