Get polarizers and analyzers with a custom fit to protect the spectroscopy optical components
.jpg "CRAIC Technologies UV-visible-NIR Polarizers")
UV-visible-NIR polarization microspectroscopy and imaging.
Introduction
CRAIC Technologies™ offers both polarizers and analyzers with a UV-visible-NIR spectral range. Designed for spectroscopy and imaging applications, these polarizers and analyzers are fitted into custom holders that are designed to protect the optical component as well as to fit smoothly and easily into the optical path of the CRAIC Technologies instrument. Both rotating and fixed polarizers and analyzers are available and can be supplied either individually or as sets, depending upon your requirements.
WIth a spectral range from the deep UV to the near IR, CRAIC Technologies polarizers are available both for transmission and incident illumination optical paths.
Polarization Microspectroscopy
Spectroscopy of birefringent samples
| Polarization microspectroscopy can yield a great deal of information about birefringent samples. Here is the spectrum of a dichroic fiber with both parallel and crossed polars. A great deal of information can be obtained by adding polarization microspectroscopy to your test protocol. |  |
Polarization Imaging
Imaging of birefringent samples
| Polarization imaging can easily and rapidly differentiate between samples, delineate mechanical stress and even for contrast enhancement. |  |
Applications
Applications
- Forensics
- Geology
- Vitrinite reflectance
- Questioend documents
- Semiconductors
- Flat panel displays
- ...and much more.
Support
CRAIC Technologies provides service and support for it's instruments worldwide. CRAIC Technologies service engineers offer instrument repair, maintenance, training and technical support for all aspects of CRAIC Technologies products.
Perfect Vision for Science™
The lit microscope base and the lit octagonal optical head are trademarks of CRAIC Technologies, Inc. CRAIC Technologies, 2030PV™, FLEX™, 508PV™, Apollo™, GeoImage™, rIQ™, Lambdafire™, Lightblades™ and "Perfect Vision for Science" are all trademarks of CRAIC Technologies, Inc. Instrument features offered depend upon instrument configuration. Features listed here may not be present in some configurations.
*Features and specifications depend upon instrument configuration. Specifications subject to change without notice.
UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.
Filters for both illumination and imaging paths in CRAIC microscopes and microspectrometers.
Introduction
CRAIC Technologies™ offers a number of bandpass, cut-off and cut-on filters for use in the illumination and image paths of CRAIC Technologies microscopes and microspectrometers. All filters are fitted into custom holders that are designed to protect the optical component as well as to fit smoothly and easily into the optical path of the CRAIC Technologies instrument. Filters can be supplied either individually or as sets, depending upon your requirements.
WIth a spectral range from the deep UV to the near IR, CRAIC Technologies filters have uses ranging from sample protection (by limiting illumination to a specific region) to enhanced imaging (to sharpen images) to spectral imaging (to see samples that are normally invisble to the standard microscope).
Illumination Path Filters
Filters designed for enhanced illumination
| Illumination path filters are designed to be inserted in the optical path between the light source and the sample on CRAIC Technologies instruments. These heavy duty filters have many applications and the holders are specifically engineered for use with CRAIC Technologies microscopes and microspectrometers. |  |
Imaging Path Filters
Filters designed for imaging
| Imaging path filters are designed to be inserted in the optical path between the sample and the digital camera on CRAIC Technologies instruments. These heavy duty filters have many applications and the holders are specifically engineered for use with CRAIC Technologies microscopes and microspectrometers. |  |
Applications
Applications
- Sample protection
- Spectral imaging
- Image enhancement
- ...and much more.
Support
CRAIC Technologies provides service and support for it's instruments worldwide. CRAIC Technologies service engineers offer instrument repair, maintenance, training and technical support for all aspects of CRAIC Technologies products.
Perfect Vision for Science™
The lit microscope base and the lit octagonal optical head are trademarks of CRAIC Technologies, Inc. CRAIC Technologies, 2030PV™, FLEX™, 508PV™, Apollo™, GeoImage™, rIQ™, Lambdafire™, Lightblades™ and "Perfect Vision for Science" are all trademarks of CRAIC Technologies, Inc. Instrument features offered depend upon instrument configuration. Features listed here may not be present in some configurations.
*Features and specifications depend upon instrument configuration. Specifications subject to change without notice.
UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.
Seamlessly and easily add capabilities to a microscope or microspectrophotometer with this optical multiplexer
Optical multiplexer to add imaging and spectroscopy to microscopes and microspectrometers.
Introduction
Lightswitch by CRAIC™ is an optical multiplexer or switch designed to add multiple capabilities to a microscope or microspectrophotometer seamlessly and easily. This device is attached to an open photoport on the microscope or microspectrometer. Additional capabilities may then be added, including UV-visible-NIR spectroscopy, UV-visible-NIR imaging, Raman spectroscopy, refractive index measurements and more.
Lightswitch by CRAIC™ economically expands the capabilities of your microscope or microspectrophotometer while yielding superior quality images and spectra.Features
Key Features*
- Attaches to many types of microscopes and microspectrometers
- Simple to use
- Solid state design
- Superior imaging quality
- Broad spectral range
What you can add to your microscope
Add spectroscopy and imaging to your microscope!
- UV Imaging
- NIR Imaging
- Polarization Imaging
- Fluorescence Imaging
- Emission Imaging
- UV-visible-NIR Reflectance Spectroscopy
- UV-visible-NIR Absorbance Spectroscopy
- UV-visible-NIR Fluorescence Spectroscopy
- UV-visible-NIR Emission Spectroscopy
- Polarization Spectroscopy
- Raman Spectroscopy
Support
CRAIC Technologies provides service and support for it's instruments worldwide. CRAIC Technologies service engineers offer instrument repair, maintenance, training and technical support for all aspects of CRAIC Technologies products.
Perfect Vision for Science™
The lit microscope base and the lit octagonal optical head are trademarks of CRAIC Technologies, Inc. CRAIC Technologies, 2030PV™, FLEX™, 508PV™, Apollo™, GeoImage™, rIQ™, Lambdafire™, Lightblades™ and "Perfect Vision for Science" are all trademarks of CRAIC Technologies, Inc. Instrument features offered depend upon instrument configuration. Features listed here may not be present in some configurations.
*Features and specifications depend upon instrument configuration. Specifications subject to change without notice.
UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.
Spectroscopy of microscopic areas on large samples
The 2030XL PRO™ microspectrophotometer is designed to acquire spectra, images, and film thickness measurements of microscopic features of large scale samples. "XL" stands for "extra large" and these are the types of samples for which this instrument was built. Built to meet your needs, the 2030XL PRO™ incorporates the latest technological advances in optics, electronics, spectroscopy and software to deliver the superior performance with unparalleled speed and capabilities. The ease-of-use for which CRAIC instruments are known has even been improved, making this instrument the cutting edge of UV-visible-NIR microspectroscopy.
The 2030XL PRO™ microspectrophotometer allows you to measure UV-visible-NIR range transmission, absorbance, reflectance, emission and photoluminescent microspectra™ of features smaller than a micron across. Yet, depending upon the instrument configuration, the size of the sample can essentially be unlimited. Now you can map color variations within pixels of the biggest flat panel displays, measure film thickness of 300 mm wafers with ease or measure the fluorescence of the largest artworks.
Raman microspectroscopy, high resolution UV microscopy and even NIR microscopy are also offered.
The 2030XL PRO™ microspectrophotometer is simple to use, the measurements are non-destructive and the spectral data is unmatched.
Introduction
Features
Key Features*
|
UV-visible-NIR, Raman and PL microspectra™ of large samples.
|
|
UV-vis-NIR Microspectroscopy
Cutting edge microspectroscopy from the leaders
|
A fully integrated microspectroscopy unit that features a spectral range from the deep UV through the visible and into the near infrared. Simultaneous and direct imaging of both the sampling aperture and the sample makes for fast, accurate measurements. Featuring Scorpii™, SampleSafe™ and Lightblades™ technology, the 2030XL PRO™ gives you the ability to measure transmission, reflectance, polarization, Raman and fluorescence spectra of even sub-micron samples. CRAIC Technologies is also the only recognized source for NIST traceable microspectrometer standards. |
 |
Raman Microspectroscopy
Flexible Raman Microspectroscopy
| When fitted with the CRAIC Apollo™ Raman spectrometer module, the 2030XL PRO™ is capable of Raman, resonance Raman and other types of measurements of microscopic samples. Modules include lasers, Raman spectrometers and the interface optics that allow you to collect high quality Raman spectra of your samples. |  |
Photoluminescence
High sensitivity emission microspectroscopy & imaging
| The 2030XL PRO™ can be configured for fluorescence and photoluminescence spectra and images of microscopic samples. Featuring Lightblades™ technology and with excitation ranging from the deep UV to the near infrared and the ability to measure the emission in the same range, the 2030XL PRO™ is a powerful tool for microscale photoluminescence spectroscopy in the materials sciences, biology, geology and more. |  |
Polarization
Microspectroscopy & imaging of UV-visible-NIR polarization
| 2030XL PRO™ can be configured to acquire the polarization spectra and images of even the smallest samples. Featuring Lightblades™ technology and with a spectral range from the UV to the NIR, the 2030XL PRO™ polarization microspectroscopy capabilities are unparalleled. The spectra and images of birefringent and other types of samples with polarization characteristics can be acquired quickly and easily with this sophisticated system. | |
Spectral Surface Mapping
Spectral Surface Mapping™
|
Combines hardware and software for automated spectral analysis and 5D mapping of samples with microscopic spatial resolution. 5D maps of the film thickness, transmission, reflectance, fluorescence, emission and Raman spectra of samples may be generated. |
 |
UV-vis-NIR Microimaging
Superior image quality from the UV to the NIR
| The 2030XL PRO™ includes a unique UV-visible-NIR microscope with research grade optics. Featuring high resolution digital imaging for color, UV and the NIR regions, the 2030XL PRO™ has sophisticated imaging software. This gives you the ability for both real time and image capture of samples by transmission, reflectance, polarization and fluorescence microscopy quickly and easily. |  |
Applications
Applications
- Semiconductor Film Thickness
- MEMS devices
- Photovoltaic Panels
- Colorimetry of flat panel displays
- Intensity mapping of flat panel displays
- Microspectra™ of Questioned Documents
- Microspectra™ of Art Works
- or any other large scale samples...
Support
CRAIC Technologies provides service and support for it's instruments worldwide. CRAIC Technologies service engineers offer instrument repair, maintenance, training and technical support for all aspects of CRAIC Technologies products.
The lit microscope base and the lit octagonal optical head are trademarks of CRAIC Technologies, Inc. CRAIC Technologies, 2030PV™, FLEX™, 508PV™, Apollo™, GeoImage™, rIQ™, Lambdafire™, Lightblades™ and "Perfect Vision for Science" are all trademarks of CRAIC Technologies, Inc. Instrument features offered depend upon instrument configuration. Features listed here may not be present in some configurations.
*Features and specifications depend upon instrument configuration. Specifications subject to change without notice.
UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.
Your Modular Confocal Raman System
The Apollo M™ Raman microspectrometer is designed for both cutting edge research and for reliability and ease-of-use. With the Apollo M™, it is fast and, easy to acquire Raman microspectra™ so you can focus on sample measurements, not on operating your instrument. As such, it is perfect for advanced research, routine research, quality control and failure analysis. The Apollo M™ Raman microspectrometer employs optics, software and hardware all optimized for Raman spectroscopy of microscopic samples, along with a fixed confocal aperture for robust and reliable measurements. The Apollo M™ Raman microspectrometer is perfect for rapid, non-destructive analysis in fields such as life sciences, materials science, chemistry and physics.
The Apollo M™ Raman spectrometer features a modular and flexible design, and can easily be installed on an upright microscope for confocal Raman microspectroscopy. Solid state spectrometers are offered for speed and sensitivity. Scanning spectrometers are also offered for advanced research. A host of other features may also be included such as kinetic Raman and photoluminescence microspectroscopy, imaging and mapping of the Raman spectra with high spatial resolution. Modules can be used together for the ultimate in experimental flexibility.
The Apollo M™ Raman spectrometer can also be combined with other CRAIC microspectrometers to add a host of capabilities ranging from UV-visible-NIR microspectroscopy to film thickness measurements and much more. Call us today to learn how the Apollo M™ can help you.
Introduction
Features
Features
The Apollo M™ Confocal Raman microspectrometer:
reliable, robust and powerful.
Key Features*
- High performance Raman microspectroscopy
- Robust, reliable and powerful
- Use alone or add to a CRAIC UV-VIS-NIR Microspectrophotometer
- Standard laser wavelengths offered include 405, 532, 633, 785, and 830 nm, with more available upon request
- Solid state Lightblades™ Raman spectrometers as standard option for high sensitivity and speed
- Photoluminescence microspectroscopy
- Raman spectral mapping
- Easy to use and maintain
- From the experts in microspectroscopy
Add to a Microspectrometer
Do more by adding Apollo M™ to a CRAIC microspectrophotometer:
 |
|
Spectral Surface Mapping
|
5D Hyperspectral Surface Mapping™ Combines hardware and software for automated spectral analysis and 5D mapping of samples with microscopic spatial resolution. 3D maps of the Raman spectra of samples may be generated. |
|
Applications
Applications
- Biology and Life Sciences
- Materials Science
- Graphene and Carbon Nanotubes
- Nanomaterials
- Geology
- Energy
- Chemistry
- Catalysts
- Physics
- Semiconductors
- Process Contamination Analysis
- Pharmaceutical Quality Control
- Explosives and Drugs of Abuse
- WMD Analysis
Support
CRAIC Technologies provides service and support for it's instruments worldwide. CRAIC Technologies service engineers offer instrument repair, maintenance, training and technical support for all aspects of CRAIC Technologies products.
The lit microscope base and the lit octagonal optical head are trademarks of CRAIC Technologies, Inc. CRAIC Technologies, 2030PV™, FLEX™, 508PV™, Apollo™, GeoImage™, rIQ™, Lambdafire™, Lightblades™ and "Perfect Vision for Science" are all trademarks of CRAIC Technologies, Inc. Instrument features offered depend upon instrument configuration. Features listed here may not be present in some configurations.*Features and specifications depend upon instrument configuration. Specifications subject to change without notice.
UV-visible-NIR microscopes, UV-visible-NIR microspectrometers and Raman microspectrometers are general purpose laboratory instruments. They have not been cleared or approved by the European IVD Directive, the United States Food and Drug Administration or any other agency for diagnostic, clinical or other medical use.
